Q-Mark QCH1202F Fan-Forced Ceiling Heater 2000/1500/1000/750-Watt Northern White
- Featured Vendors
- Line Card
*Images are for illustration purposes only and may not be an exact representation of the product
Q-Mark QCH1202F Fan-Forced Ceiling Heater 2000/1500/1000/750-Watt Northern White
SKU: 397453
Q-Mark Fan-forced ceiling heater in northern white color, uses steel finned totally enclosed steel sheathed nickel chromium heating element to provide heat up to 6826/5119 BTU/hr. It is designed to operate with an air flow rate of 65 CFM. This ceiling heater employs impedance protected and permanently lubricated motor with totally enclosed rotor. It has a voltage rating of 240/208-Volts, current rating of 8.3/7.2-Amps/4.2/3.6-Amps and power rating of 2000/1500-Watts/1000/750-Watts.
This 1-Phase heater features 20 gauge steel housing with phosphatized/baked enamel painted finish. It has a dimension of 9-3/4-Inch x 11-Inch x 3-3/4-Inch. The back box serves as rough-in box to facilitate recessed/surface mounting on masonry, T-bar or frame ceiling construction. It is suitable for use in basements, offices, converted attics, bathrooms, workshops, lobbies, hallways and common areas. This heater has a temperature rating of 45 to 95 deg F. It comes with backbox, 10-1/2-Inch x 12-1/2-Inch x 1-Inch grille and installation manual. Heater is cULus listed.
This 1-Phase heater features 20 gauge steel housing with phosphatized/baked enamel painted finish. It has a dimension of 9-3/4-Inch x 11-Inch x 3-3/4-Inch. The back box serves as rough-in box to facilitate recessed/surface mounting on masonry, T-bar or frame ceiling construction. It is suitable for use in basements, offices, converted attics, bathrooms, workshops, lobbies, hallways and common areas. This heater has a temperature rating of 45 to 95 deg F. It comes with backbox, 10-1/2-Inch x 12-1/2-Inch x 1-Inch grille and installation manual. Heater is cULus listed.
- Provided with power on/off switch to facilitate easy operation
- The 3-Piece design facilitates effortless installation
- Equipped with 2-Pole single throw disconnect switch for ensuring positive disconnection of power supply
- Louvered front cover features commercial-grade steel construction in Navajo white baked enamel finish
- Employs bi-metallic snap-action type fan control
- Automatic fan delay feature eliminates cold drafts on start-up and discharges residual heat from the heater body during shutdown
- Requires remote wall thermostat
- Incorporates thermal cut-out that shuts off the heater in the event of over-heating
Overview
Q-Mark Fan-forced ceiling heater in northern white color, uses steel finned totally enclosed steel sheathed nickel chromium heating element to provide heat up to 6826/5119 BTU/hr. It is designed to operate with an air flow rate of 65 CFM. This ceiling heater employs impedance protected and permanently lubricated motor with totally enclosed rotor. It has a voltage rating of 240/208-Volts, current rating of 8.3/7.2-Amps/4.2/3.6-Amps and power rating of 2000/1500-Watts/1000/750-Watts.
This 1-Phase heater features 20 gauge steel housing with phosphatized/baked enamel painted finish. It has a dimension of 9-3/4-Inch x 11-Inch x 3-3/4-Inch. The back box serves as rough-in box to facilitate recessed/surface mounting on masonry, T-bar or frame ceiling construction. It is suitable for use in basements, offices, converted attics, bathrooms, workshops, lobbies, hallways and common areas. This heater has a temperature rating of 45 to 95 deg F. It comes with backbox, 10-1/2-Inch x 12-1/2-Inch x 1-Inch grille and installation manual. Heater is cULus listed.
This 1-Phase heater features 20 gauge steel housing with phosphatized/baked enamel painted finish. It has a dimension of 9-3/4-Inch x 11-Inch x 3-3/4-Inch. The back box serves as rough-in box to facilitate recessed/surface mounting on masonry, T-bar or frame ceiling construction. It is suitable for use in basements, offices, converted attics, bathrooms, workshops, lobbies, hallways and common areas. This heater has a temperature rating of 45 to 95 deg F. It comes with backbox, 10-1/2-Inch x 12-1/2-Inch x 1-Inch grille and installation manual. Heater is cULus listed.
Specifications
| Temperature Rating | 45 to 95 deg F |
Output | 6826/5119 BTU/Hour |
|---|---|---|---|
| Item Name | Fan-Forced Ceiling Heater |
Voltage Rating | 240/208 Volt |
| Model | QCH |
Mounting | Ceiling |
| Standards | cULus Certified |
Energy Star Flag | No |
| UNSPSC | 40101800 |
Motor Type | Impedance Protected and Permanently Lubricated with Totally Enclosed Rotor |
| Manufacturer Part Number | QCH1202F |
Phase | 1 |
| Manufacturer Name | Marley Engineered Products |
UPC | 68536016504 |
| Color | Northern White |
Amperage Rating | 8.3/7.2/4.2/3.6 Amp |
| Air Flow | 65 CFM |
Includes | Heating Unit, Backbox, Grille, Installation Manual |
| Finish | Phosphatized, Baked Enamel Painted |
Housing Material | 20 Gauge Steel |
| Heating Element | Steel Finned Totally Enclosed Steel Sheathed Nickel Chromium |
Grille Dimension | 10-1/2 Inch Length x 12-1/2 Inch Width x 1 Inch Depth |
| Power Rating | 2000/1500/1000/750 Watt |
Feature8 | Incorporates thermal cut-out that shuts off the heater in the event of over-heating |
| Dimensions | 9-3/4 Inch Length x 11 Inch Width x 3-3/4 Inch Depth |
Brand Name | Q-Mark |