Lutron HL3-T432-277-1-S (1) 32-Watt T4 Triple-Tube 4-Pin Lamp Electronic Fluorescent Ballast 277-Volt AC Hi-lume®
- Featured Vendors
- Line Card
*Images are for illustration purposes only and may not be an exact representation of the product
Lutron HL3-T432-277-1-S (1) 32-Watt T4 Triple-Tube 4-Pin Lamp Electronic Fluorescent Ballast 277-Volt AC Hi-lume®
SKU: 108181
Lutron Hi-lume® Electronic fluorescent ballast is suitable to use with one 32-Watt T4 triple tube 4-Pin lamp. It has voltage rating of 277-Volt AC and current rating of 0.13-Amp. Programmed rapid start ballast with greater than or equal to 0.95 ballast factor, offers greater than 0.95 power factor. Ballast accommodates solid wire of size 18-AWG. Ballast operates at the frequency rating of 60-Hz. It provides Class P protection. Ballast measures 4.9-Inch x 1-Inch x 3-Inch.
Ballast incorporates inrush current limiting circuitry to prevent circuit breaker tripping, switch arcing and relay failure. It has low harmonic distortion throughout the entire dimming range and maintains consistent power quality. It withstands temperature rating of 75 deg C. Ballast is UL listed, CSA certified and meets FCC/ISO/ANSI/ESD standards.
Ballast incorporates inrush current limiting circuitry to prevent circuit breaker tripping, switch arcing and relay failure. It has low harmonic distortion throughout the entire dimming range and maintains consistent power quality. It withstands temperature rating of 75 deg C. Ballast is UL listed, CSA certified and meets FCC/ISO/ANSI/ESD standards.
- Standard 3-Wire line voltage phase-control technology for consistent fixture-to-fixture dimming performance
- Lamps turn on to any dimmed level without flashing to full brightness
- End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life-cycle
- Applicable for linear lamps, ballasts maintain consistent light output for different lamp lengths, ensuring fixture uniformity
- Ultra quiet operation
- Protected from miswires of any input power to control lead or from lamp leads to each other and/or ground
- Size A case. Maximum inrush current is 3-Amp per ballast at 277-Volt AC, 7-Amp per ballast at 120-Volt AC, Standby
Overview
Lutron Hi-lume® Electronic fluorescent ballast is suitable to use with one 32-Watt T4 triple tube 4-Pin lamp. It has voltage rating of 277-Volt AC and current rating of 0.13-Amp. Programmed rapid start ballast with greater than or equal to 0.95 ballast factor, offers greater than 0.95 power factor. Ballast accommodates solid wire of size 18-AWG. Ballast operates at the frequency rating of 60-Hz. It provides Class P protection. Ballast measures 4.9-Inch x 1-Inch x 3-Inch.
Ballast incorporates inrush current limiting circuitry to prevent circuit breaker tripping, switch arcing and relay failure. It has low harmonic distortion throughout the entire dimming range and maintains consistent power quality. It withstands temperature rating of 75 deg C. Ballast is UL listed, CSA certified and meets FCC/ISO/ANSI/ESD standards.
Ballast incorporates inrush current limiting circuitry to prevent circuit breaker tripping, switch arcing and relay failure. It has low harmonic distortion throughout the entire dimming range and maintains consistent power quality. It withstands temperature rating of 75 deg C. Ballast is UL listed, CSA certified and meets FCC/ISO/ANSI/ESD standards.
Specifications
| Finish | No |
Grille Shape | No |
|---|---|---|---|
| Blade Material | No |
Temperature Rating | 167 deg F (75 deg C) Case |
| UNSPSC | 39101901 |
Mounting | Screw |
| Energy Star Flag | No |
Number of Lamps | 1.0000 |
| Thermal Protection | Class P |
Power Factor | >0.95 |
| Standards | UL Listed, CSA Certified, Meets FCC Part 18 Non-Consumer Compliant, ISO 9001.2008, ANSI/ESD S20.20 |
Ballast Wattage | 36 Watt Input |
| Start Type | Programmed/Rapid |
Sub Brand | Hi-lume® |
| Total Harmonic Distortion | <10% |
Voltage Rating | 277 Volt AC |
| Dimmable | Yes |
Minimum Starting Temperature | 50 |
| Manufacturer Part Number | HL3-T432-277-1-S |
Manufacturer Name | Lutron |
| UPC | 02755702749 |
Amperage Rating | 0.13 Amp |
| Dimensions | 4.9 Inch Width x 1 Inch Depth x 3 Inch Height |
ANSI Code | C82.11/C62.41 |
| Ballast Factor | >=0.95 |
Brand Name | Lutron |
| Conductor Size | 18 AWG (0.75 Sq-mm) Solid Wire Per Terminal |
Environmental Conditions | <90% Non-Condensing Relative Humidity |
| Frequency Rating | 60 Hz |
Item Name | Electronic Fluorescent Ballast |
| Lamp Type | 32 Watt T4 4-Pin Triple Tube |